WE HAVE SOME GREAT LIMITED-TIME OFFERS - CLICK HERE TO VIEW THEM WE SHIP WORLDWIDE    /    All UK ORDERS GREATER THAN £75 EX VAT DELIVERED FREE    /    WE SHIP WORLDWIDE    /    ALL EUROPEAN ORDERS GREATER THAN £500.00 ex VAT DELIVERED FREE    /    WE SHIP WORLDWIDE
    Share this page on Facebook   Share this page on LinkedIn   Share this page on Twitter   Share this page on Whatsapp   

    Rapid Ref : CK-CK9RG  Mfr Ref : CK9 RG

    CK9 Torch Body Rigid
    CK9 RG CK-CK9RG

    £21.70  EX VAT
    SSP Suggested Selling Price = £43.40  YOU SAVE £21.70

    CK9 Torch Parts FAQs

    Replacement parts for the torch itself - bodies, handles, power cables and backcaps - and how to match them to your torch.

    How do I work out the right replacement part for my torch?icon-minus-redicon-plus-red

    Start with the torch itself. Look for the type or series marking on the body, handle or cable fitting, and check the data plate or manual for the torch type, cooling method and rating. Then compare the part number on the old part, if it is still legible, with the part list in the manual.

    Torch type usually decides which sizes of backcap, collet body and cup fit, so a part that looks the same may not match. Photograph the old part and note how the cable connects to the machine, because connector style is a common cause of wrong orders. If you cannot find any marking, our team can help you identify it from photos.

    Should I choose a flexible or a rigid torch body?icon-minus-redicon-plus-red

    A flexible body lets you set the head angle to reach awkward joints, which can reduce strain on the hand and wrist. A rigid body is a fixed shape that is simple, steady and suits repeat work where the angle never changes.

    The trade-off is wear: a flexible neck contains a bendable internal section that can eventually loosen or break if it is bent repeatedly, whereas a rigid body has nothing to flex. Ask what your joints really need. If you rarely change the angle, rigid is usually the more durable choice; if access varies job to job, flexible is more practical. Make sure the body you choose is made for your torch type and current rating.

    How do I bend a flexible torch body without damaging it?icon-minus-redicon-plus-red

    Follow the bend limit given in the manual for your torch, because bending past it can damage the neck. As general practice, make gentle bends, spread the bend along the flexible section rather than kinking one spot, and avoid bending the neck back and forth more often than you need to.

    Set the angle for the job, then leave it. Do not use the neck as a lever, do not bend it to free a stuck part, and never bend a hot torch with bare hands. If the neck feels loose, will not hold its angle or the insulation is split, replace the body rather than continue using it. Your manual is the right place to check the maximum angle.

    What does the backcap do and how do I choose between long, medium and short?icon-minus-redicon-plus-red

    The backcap screws into the rear of the torch head, holds the tungsten electrode firmly in place and helps keep air from leaking into the head. Backcaps normally come in long, medium and short lengths.

    Choose by three things: the torch type, because it dictates the size; the access you have to the joint, since short, button-style caps suit tight spaces; and the tungsten length. A long backcap takes a full-length electrode, while medium and short caps are normally used with electrodes cut down to a shorter piece. Keep the right cap for the way you work, and replace one with damaged threads or a loose grip on the electrode.

    Shop Similar Categories